When to use
Munns Professional Buffalo Booster can be used at any time of year, promoting a thick, green lawn all year round.
5 easy steps to use your Munns® Professional Buffalo Booster
- Ensure that hard surfaces adjacent to lawn are dry before applying to avoid staining.
- Apply approx 22g per square metre (m²), which is about a third of one adult handful.
- Using a sweeping arc motion, spread evenly at the recommended rate, spreading half the amount required walking in a north-south direction and the remainder in an east-west direction.
- Sweep excess product off paths and driveways onto the lawn before watering, as product may stain when wet.
- Always water in well immediately after application
Application directions
For best results apply at least in early spring, summer and autumn. Apply during fine weather, avoiding windy conditions and heavy rain.
DO NOT APPLY if maximum temperature exceeds 30℃, when soil is dry or lawn is moisture stressed. Ensure stressed lawns are well watered before applying. All lawns must be well watered immediately after application, ensure you water well. If hot conditions are expected following application, ensure you water well.
NOT recommended for new lawns or lawns less than 12 weeks old.
How often
Repeat every 8-12 weeks during the growing season, for a total of at least 3-4 applications annually.
SANDY SOILS AND STRESSED LAWNS: Apply at half rate, twice as often (every 4- 6 weeks).
Share
Share this article on social media