Lowers the pH of soil, making it more acidic. Acidic soil is required when growing acid loving plants such as camellias, azaleas, rhododendrons, magnolias and blueberries. An easy-to-use liquid formulation, it can be diluted and applied without the dust and the mess associated with traditional granular products.

Features

  • Easy to use liquid
  • No dusty powders

Direction for use

Shake well before use 

Application

For reducing soil pH (making soil more acidic, can also alleviate lime induced chlorosis

Soil Type

Sandy – Mix 25-50ml in 2L water Loam – Mix 50-80ml in 2L water Clay – Mix 80-120ml in 2L water

Frequency – Every 4 weeks until required soil pH is acheived

Timing – Apply as necessary

Area – 2L / 2m2: apply to moist soil around plant

Notes: check the soil pH before and during treatment.  Allow at least 4 weeks for the soil pH to reach equilibrium before testing the pH during treatment.

Typical soil pH ranges are:

Very acidic soil pH =  below 5.5

Acidic soil pH = below 7

Neutral soil pH = 7

This product is a sulfur suspension.  Ensure that product is soaked well into the soil during application. 

NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABEL UNLESS AUTHORISED 

 
 
Size 500ml
Ingredient Sulphur (S) as elemental sulphur 50% w/v

Storage

Store in a cool dry place away from direct sunlight. Keep out of reach of children and pets.

Caution

DO NOT apply to foliage. If contact occurs, rinse off immediately with water. Always apply to moist soil. Do not apply when maximum temperature is expected to reach above 30°C or if the plant is suffering moisture stress. Best applied during early morning or late afternoon.

Warning

Do not swallow. This product may act as an irritant. Avoid inhalation and contact with the eyes and skin. Wear appropriate skin and eye protection when mixing and applying product. Wash hands and affected parts on contact. Do not contaminate waterways.


Related products


Project guides & articles