Corrects a range of micro nutrient deficiencies.  Deficiencies in plants are indicated by stunted growth, yellow leaves or poor fruit quality. Yates Trace Element Chelates provides nutrients in small doses, so it can be used where the exact deficiency cannot be diagnosed.  Is an easy to use liquid trace element mix. Recommended as a foliar application, this delivers nutrients directly to the deficient leaves for faster results. Foliar applications also result in much lower additions into the soil when compared to traditional soil drench applications, resulting in less wastage and lower risk of soil toxicity.

 

Features

  • Work differently from other chelates
  • Release nutrients gradually to minimise leaf burn
  • Are targeted solutions for fast results
  • Stick firmly to foliage and are rain-fast in 2-3 hours

Directions For Use:

GENERAL APPLICATION

Application – Alleviate general trace element deficiency symptoms.
Method foliar spray recommended – Spray to lightly wet the leaves, before runoff. NOT for stone fruit.
Rate – Mix 20ml in 1L water. Apply with garden sprayer.
Frequency – Every 4-6 weeks, as needed.
Timing – Apply when symptoms appear. Reapply as necessary.
Area – 1L/15m2 depending on size of plant canopy.

 

STONE FRUIT

Application – Alleviate general trace element deficiency symptoms.
Method Soil drench – only recommended for stone fruit.
Rate – Mix 5-10ml in 2L water. Apply with watering can.
Frequency – Every 4-6 weeks, as needed.
Timing – Apply when symptoms appear. Reapply as necessary.
Area – 2L/2m2 apply to moist soil around plant.

Apply to leaves as a fine mist.  For optimum results reassess plant symptoms every few weeks to decide if further applications are necessary.  Begin treatment as soon as symptoms become visible or early in the growing season if a deficiency is known to exist.  It is best to apply many smaller amounts rather than a single large amount. 

NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABEL UNLESS AUTHORISED

 
Size 500ml
Ingredient

Sulphur (S) as sulphate 0.53% w/v 

Iron (Fe) as iron lignosulphonate chelate 0.34% w/v

Magnesium (Mg) as magnesium lignosulphonate chelate 0.34% w/v

Zinc (Zn) as zinc lignosulfonate chelate 0.34% w/v

Manganese (Mn) as manganese lignosulphonate chelate 0.26% w/v

Boron (B) as boron lignosulphonate chelate 0.13% w/v

Copper (Cu) as copper lignosulphonate chelate 0.043% w/v

Molybdenum (Mo) molybdenum lignosulphonate chelate 0.005% w/v

Storage

Store in a cool dry place away from direct sunlight. Keep out of reach of children and pets.

Precautions

Do not swallow. The spray from this product may act as an irritant. Avoid inhalation and contact with the eyes and skin. Wear appropriate skin and eye protection when mixing and applying product. Wash hands and affected parts on contact.

Caution

DO NOT over apply spray leading to run off. Do not apply during flowering. Do not mix with nitrogen fertilisers, as this may increase the risk of leaf burn. Always apply to moist soil. Do not apply when maximum temperature is expected to reach above 25°C or if the plant is suffering moisture stress. Apply during early morning or late afternoon when evaporation will be less.

 

Related products


Project guides & articles