Free Shipping When You Spend $50 or More
How do I know how much formula is left in the pouch?
Check visually or by weight. Refer to the information on pack to see specific coverage guidelines across the Click & Grow® range.
How do I know which spray setting to use?
Whichever setting gives you the best coverage for the area and application. For example, when feeding large areas of lawn, the horizontal flat setting works well.
Why won’t the trigger connect to my hose securely?
The trigger is compatible with common 12 mm hose connectors as well as most commercially available hose types.
How do I open the cap on the pouch?
Remove the seal and pull the cap straight off (rather than twisting). Please keep the cap to reapply after application.
I turned on the tap and the pouch shot out of the trigger. I cannot get the pouch to connect and stay in once the water is turned on. What do I do?
Please ensure you are applying enough force, and the connector is fully inserted in the trigger. An audible click sound should be heard when the pouch is successfully attached. Ensure no teeth are missing from the hose connection.
How long do I flush out the trigger after use?
When finished, turn pouch switch to ‘OFF’. Run water through the trigger for 10 seconds to flush any remaining product out. To release pouch press the ‘EJECT’ button on the underside of the trigger.
How do I know the product is being dispensed?
Some products will change the colour of the water coming out of the trigger, others will have only a faint scent. If the trigger setting is set to ‘ON’ the pouch will be dispensing product and you will see the pouch volume change.
What PPE is required while applying?
Please see icons and safety directions on the back of the pouch as these instructions vary across the range.